6000 Watt Inverter 24Vdc to 120V 240Vac Split Phase Pure Sine Wave – With 85A Battery Charger | APC6024D

This 6 kW 24vdc 120/240vac inverter charger is designed with voltage setting for Tesla Model S battery modules , it provides the perfect power system for 24v Recreational Vehicles (RV) and boat applications. This inverter supports the specific charge and operating voltages of the Tesla Model S battery modules from 18V to 25Vdc

It works with Tesla Model S 24vdc lithium battery module with voltage settings with tailored algorithm at battery type selector 9.
• Low Battery Cut Off: 18/19Vdc
• Low Battery Voltage Alarm/ Charger Activation: 19/20Vdc
• Low Battery Cut Off Recovery: 23.5Vdc
• Charger Cut Off: 24Vdc
• High Battery Voltage Alarm: 25.25Vdc
• High Battery Cut Off: 25.5Vdc

The battery charger also works with the lead acid, AGM, GEL batteries, etc.

It is a 6KVA inverter, battery charger and transfer switch in one package.
The built-in 85 amp battery charger accepts generator power or existing grid power to maintain a charge on batteries.
The inverter 24Vdc to 240Vac works at nominal 24Volt battery bank , and is capable of 120/240 volts AC output, with full 6000 watts available at 240Vac ( two 120Vac hot lines ) and a max of 3000 watts between each 120Vac hot line and neutral.
It is your average every-day power inverter, it gives you’re an unsurpassed surge output power of 18000 watts for 20 seconds and a peak DC-AC efficiency of 88%.
The 6KVA inverter is built with high efficiency components with an idle consumption of 15 watts in power saver mode, it is great for running your whole house, business office or large RV.
Its 110/220V split-phase power output brings smooth integration with traditional North American electrical wiring practices while keeps the flexibility to power 110Vac and/or 220vac at loads at the same time.
Great for home and shop applications with a 220 power distribution panel in place.
There are four connections: L1, L2, neutral, and ground. On the input side, the input neutral is not required, only L1, L2, and ground are required to be connected.
On the output side, either L1 or L2 to neutral will provide 120 VAC. The L1 to L2 will provide 240Vac.
Because of this, it may also be commonly referred to as a 3-wire, single-phase, mid-point neutral 240 volt inverter.
The rugged split-phase inverter allows a 100% imbalance.
You can run 240v loads such as 240v welder, clothes dryer, well pumps, water heaters, electric range by connecting to the two 120v output terminals.
It accepts 240 volts AC with input voltage range of 160-264Vac to bypass AC input and recharge batteries.
This 6KVA inverter works with both 60hz and 50hz electronics.
The output frequency can be manually set at 50 or 60 Hz through the DIP switch, thus it virtually conforms to most electrical systems worldwide.
However, the inverter 24Vdc to 240Vac can utilize grid-power or generator power to charge the batteries and transfer the power to your application. It’s built with a seamless transition transfer switch. If the grid power fails, it becomes a true UPS in emergency situations and natural disasters.
The inverter 24Vdc to 240Vac comes with Auto Generator Start that starts up a generator and provides charge to the batteries or provides power to your home.
This inverter charger supports a remote diagnostics LCD screen displaying abnormalities on the system, giving you clear directions to track the issue and troubleshoot.
Currently, we offer a free remote LCD panel and BTS in the package.